How to Use The Nail Stamper

If you are interested in nail art, you may want to try using a nail stamper. Nail stamping kits always come with a disc that has designs etched into it, a scraper to remove excess nail polish, and a stamp that allows you to roll the design onto your nails. Using these tools, you can begin stamping fun and whimsical designs on your own nails.

1. Apply a clear base coat. A base coat will protect your nails from the harsh effects that polish can have. It will create a barrier between the nail and the polish and prevent staining and the nail from becoming too worn down and brittle from the chemicals found in nail polish. There are different types of base coats available such as quick-drying formulas, sensitive formulas, hardening formulas, and more.

  • Hardening formulas are formulated specifically for weak and brittle nails to protect them from breaking. They are often infused with vitamins and keratin to help you achieve stronger, healthier nails.
  • Quick-drying formulas are perfect for individuals on the go and who don’t have a lot of time to wait for each coat of polish to dry thoroughly.
  • Sensitive formulas are great for those with sensitive skin and do not want to risk any reactions to the polish.

2. Apply the base color. Once the base coat has dried, apply your desired color or colors to the nails. If the color isn’t pigmented enough with the first layer, apply a second layer. Allow a bit of time between coats for the nail polish to dry.

3. Allow the nail polish to dry completely. Place your nails in front of a fan or use a nail drier to help speed up the drying process. Cold temperatures help nails dry faster–you can try blow drying your nails with the cold setting to help them dry. Another method would be to use ice water to harden nails.

  • After the polish has been applied, wait at least one minute to allow the polish to set and harden a bit.
  • Dip your nails in a bowl of cold or ice water for approximately two minutes to help the nails dry.

4. Coat the design with polish. Select your desired pattern from one of the stamping plates. Paint over the design with polish. It is best to use a highly pigmented, thicker polish for this.

  • A good rule of thumb is to use a polish that will cover the nail with one coat and will not be sheer.
  • Some kits come with special stamping polish. This polish is simply a thicker polish than ordinary formulas. You can choose whether or not you would like to use this polish, based on your preference.

5. Scrape off the excess polish. Hold the scraper at a 45-degree angle to the stamping plate. Firmly and swiftly scrape the excess polish away, until you can clearly see the design. Wipe the scraper on a paper towel to remove the nail polish. If it did not scrape away all of the excess polish the first time, scrape the stamping plate again.

6. Use the stamper to pick up the polish. Pick up your stamper and roll it over the design on the plate, starting from one side of the stamper and rolling it to the other side. You should be able to clearly see the design on the surface of the stamper. Most of the polish should have been picked up from the stamping plate.

7. Roll the stamper over the nail. With the polish covering the surface of the stamper in the chosen design, roll the stamper over the nail, moving from one side to the other. Press down firmly but not so firmly that the design gets smudged. Lift the stamper away from the nail and ensure that the design has been imprinted on the nail. If not, you may need to try again or start over by removing all of the polish with a nail polish remover and a cotton ball.

8. Coat the nail with a clear topcoat. When you have finished stamping the design on your nail, wait a minute or two for the polish to set and harden a bit. Coat the polish with a clear top coat to protect the design and to make the nail polish last longer. A top coat will ensure that the nail stays somewhat protected from daily wear and tear.

Share on facebook
Share on twitter
Share on linkedin

Leave a Comment

Your email address will not be published. Required fields are marked *